Detcon Sensor Duct Mount Kit FP/TP/DM/IR Series Manual de usuario descargar pdf (Pagina 5)

1.2.2 INSTALLATION

1 - Cut clearance hole in duct as shown below. Cutout is the same for square or round ducts.

2 - Mount the duct mount kit using four 1/4” sheet metal bolts or other appropriate hardware.

3 - If necessary you may enhance mounting integrity by using the two holes on the upper right portion of

the duct mount plate. Use standoffs and 1/4” sheet metal bolts or other appropriate hardware.

4 - Perform installation wiring as described in the sensor assembly instruction manual. Use flexible conduit

to allow for future maintenance.

Detcon Duct Mount Kit PG.5

4.25

3.125

Cut Out

Cal Port

HOUSTON, TEXAS

detcon inc.

Duct Mount Kit

51.5 .5

1.4

5.5

1 2 3 4 5 6 7 8

Sin comentarios

Detcon Sensor Duct Mount Kit FP/TP/DM/IR Series Manual de usuario Pagina 5